Ara mostrant els elements 41-60 de 141
Elkherbawy, Ahmed Abdelbasset (Data de defensa: 2019-10-22)
Lean Construction is regarded as an innovative approach of management for various types of projects in the field of construction. As much as it is currently applied in some countries, its expansion is inevitable, for better ...
Trubat Casal, Pau (Data de defensa: 2020-03-12)
In the framework of the reduction of the emissions of greenhouse gases, FOWT will be the technology that will exploit the wind resources in deep seas. In order to achieve a commercial deployment of this technology, a cost ...
Shen, Yanfei (Data de defensa: 2019-12-02)
In AISC 360-16, the Direct Analysis Method (DM) has been set as the primary method for the stability design of frames. DM, considering initial global sway imperfection, is essentially Geometrically Non-linear Analysis (GNA) ...
Celada Blesa, Ulric (Data de defensa: 2019-12-16)
Partially Prestressed Concrete (PPC) is an intermediate design approach between reinforced and totally prestressed concrete, that enables controlled cracks in service phase. Conversely, totally prestressed concrete is ...
Borralleras Mas, Pere (Data de defensa: 2019-11-15)
The presence of clays in the sands used for concrete production interferes with the development of the fluidity of concrete, producing an instantaneous slump loss just after batching and the premature loss of fluidity. ...
Barrias, António (Data de defensa: 2018-11-05)
In this doctoral thesis it is proposed to research and assess the performance of the use of distributed optical fiber sensors (DOFS), more specifically the case of the optical backscattered reflectometry (OBR) based system, ...
Bortolini, Rafaela (Data de defensa: 2019-02-28)
The performance of existing buildings is receiving increased concern due to the need to renovate the aging building stock and provide better quality of life for end users. The conservation state of buildings and the indoor ...
Gobbi, Andressa (Data de defensa: 2019-01-25)
A significant part of the pathologies found in concrete dams is related with the presence of unsound aggregates that react with the cement paste. Such reactions may lead to expansions, causing damage and compromising the ...
Galeote Moreno, Eduardo (Data de defensa: 2018-12-14)
Fibre reinforced concrete (FRC) presents objectively proven advantages in terms of post-cracking strength and manufacturing procedures. As a result, FRC with structural responsibility is increasingly being used in the ...
Elkoro Ugarteburu, Ander (Data de defensa: 2018-10-26)
This thesis discusses the development of a new methodology for 3D printing of TiO2 nanoparticles and its applications in air purification and hydrogen production. A dosage has been obtained that allows 3D printing by DIW ...
Vieira, Mylene de Melo (Data de defensa: 2018-10-19)
High performance steel fibre reinforced cementitious composites (HPSFRCCs) show enhanced structural performance and durability. The improved properties favour its use in agressive conditions (such as marine environment) ...
López Carreño, Rubén-Daniel (Data de defensa: 2018-07-31)
The construction and conservation of road networks represent a major part of public expenditure. For instance, the EU-28 countries annually spend approximately EUR 20.000 million on roadway preservation. These figures ...
Lei, Jun (Data de defensa: 2018-08-14)
During the construction and operation stages of structures, various factors lead to irreversible degradation that could affect the normal use and the public safety of these structures. In recent years, it has been common ...
Pujol Sánchez, Mireia (Data de defensa: 2018-06-26)
The use of externally bonded fibre reinforced polymers, FRP, for strengthening reinforced concrete (RC) beams or columns is an alternative to other traditional strengthening techniques due to its high strength-to-weight ...
Fernández Rubio, Cristina (Data de defensa: 2018-03-16)
The shrinkage of concrete and the current methods to mitigate this phenomenon are mainly based on the realization of retraction joints approximately 24 hours after the mixing. These joints represent a critical point in the ...
Herrera Mesén, Carlos Manuel (Data de defensa: 2018-03-16)
Sprayed cementitious materials are widely used in the construction industry, from buildings to infrastructure. The process of construction consists of spraying a concrete mix that consolidates once it reaches the substrate. ...
Saloustros, Savvas (Data de defensa: 2017-11-29)
Numerical methods aid significantly the engineering efforts towards the conservation of existing masonry structures and the design of new ones. Among them, macro-mechanical finite element methods based on the smeared crack ...
Sánchez Calderón, Luis Alberto (Data de defensa: 2018-01-16)
A system that attempts to find cracks in a RGB picture of a concrete beam, measure the cracks angles and widths; and classify crack patterns in 3 pathologies has been designed and implemented in the MATLAB programming ...
Ikumi Montserrat, Tai (Data de defensa: 2017-10-30)
The external sulfate attack (ESA) is a complex degradation process typically compromising the durability of underground foundations, nuclear or industrial waste containments and tunnel linings exposed to sulfate solutions. ...
Martirosyan, Razmik (Data de defensa: 2017-09-29)
Nowadays, concrete pavements are one of the main traditional options of building roads and highways. Moreover, concrete pavements are used for various ground transport infrastructures such as sidewalks, streets and airport. ...